Lowara Pumps

These are quiet, high efficiency pumps for both domestic (HM) and industrial (HMS) use. The HMS version is made entirely from 316 stainless steel, with various mechanical seal options, and can be used in various applications such as water distribution, rainwater pumping, industrial washing equipment, pressure boosting, irrigation and various chilling and cooling jobs.

These pumps are available with either single (M) or three (T) phase electric motors.

Please call for further information and prices.

These pumps are constructed from 304 stainless steel, but are also available in a 316 stainless option (N version). They can be fitted with various mechanical seal face and elastomer (rubber) combinations, ranging from Nitrile, EPDM and FPM, with Carbon versus Ceramic as standard faces or with Silicon Carbide or Tungsten Carbide for more arduous duties.

Common applications include pressure boosting, industrial washing equipment, heating, ventilation and air conditioning duties, and can be found in Breweries as a hot wort pump, Launderettes, Spark Erosion, Electro plating and general manufacturing industries.

These pumps are available with either single (M) or three (T) phase electric motors.

Please call for further information and prices.

Similar to the CEA range but constructed from 316 stainless steel with Silicon Carbide and Tungsten Carbide mechanical seal faces with FPM (Viton) elastomers as standard.

They are fitted with an open impeller and can handle solids up to 11mm diameter for the CO350 range and 20mm diameter for the CO500 range.

Due to the materials of construction coupled with the open impeller arrangement, these pumps are particularly suited for pumping moderately aggressive liquids containing suspended solids. Often found in Engineering factories pumping coolant (suds), also used for spray booth water curtains, dye pumps or general industrial washing applications, when the liquid contains traces of acids/chemicals etc (please contact us for chemical compatibility)

These pumps are available with either single (M) or three (T) phase electric motors.

Please call for further information and prices.

These pumps are constructed from 316 stainless steel with Carbon versus Ceramic mechanical seals (other options available on request) and FPM elastomers.

The SHE has an extended motor shaft, whilst the SHS (our preferred configuration) is fitted with a 316 stainless steel stub-shaft, so can be fitted with a standard IE2 electric motor. They are designed to pump hot, (120 deg C) cold (-10 deg C) and moderately aggressive liquids (please contact us for chemical compatibility) and are used in a variety of industries ranging from water treatment through to chillers, irrigation and general water distribution.

Please call for further information and prices.

Constructed from 316 stainless steel, and similar to the SHE SHS range but fitted with Silicon Carbide and FPM hard faced mechanical seals as standard, and also fitted with an open impeller for solids handling of  20mm diameter up to 40mm diameter depending on the model.

Often found in arduous applications in Dyeing and Finishing Textile factories and washing systems for food factories.

Please call for further information and prices.

A small range of close coupled self priming pumps fitted with a side channel and star impeller. These pumps are designed to stay primed even in the presence of dissolved or entrained gasses, or when the suction pipe is empty or partially empty.

Constructed from Cast Iron, but with a Brass impeller and Brass front and rear diffuser plate, designed to prevent jamming if oxidation were to occur.

The range consists of the SP5 SP7 SP5T SP7T/D and SP5A, with flow rates up to 45 litres per minute and heads up to 50 metres (5 bar)

Please call for further information and prices.

A small range of close coupled centrifugal pumps constructed from stainless steel and technopolymer, and fitted with a Carbon Ceramic EPDM mechanical seal.

Used primarily in domestic applications, such as pressure boosting, rainwater collection and garden irrigation. The garden version is fitted with a handle and terminal box with a built in on/off switch.

Available in single phase 240 volts or three phase 415 volt versions, with flow rates up to 70 litres per minute and heads (pressures) up to 45 metres (4.5 bar).

The 240 volt range consists of  BGM3 BGM5 BGM7 BGM9 BGM11, and the 415 volt range consists of  BG3 BG5 BG7 BG9 BG11.

Please call for further information and prices.

Known under a few various names such as, ITT Marlow, Hydroair, JEC, AV, and Argonaut, these pumps are ideal for both private and community swimming pools, for water tanks, medium sized pond duties and light industrial applications.

They are suitable for seawater and water treated with chlorine, bromine and iodine.

If replacing a previous Marlow pump, we can supply the new model with suitable fittings to make re-connecting the pipe-work a much easier job. Popular models include the AV50, AV75, AV100, AV150, AV200 and the AV250.

Please call for further information and prices.

A small range of peripheral pumps (also known as regenerative turbine pumps) which are available in both cast iron for general cold water duties, or in bronze for sea water or hot water duties. Due to the pump’s ability to develop high heads with low motor powers, these pumps can be found in a variety of different applications ranging from pressure boosting to general washing, cooling and chiller duties.

Popular pump models include the PABLBM15 which is an all bronze pump with the suction port on the side of the pump. In cast iron, there are models PM16, PM21, PM30, PM40, PM 60 and PM70 (The “M” denotes single (mono) phase) and also available in a three phase version P16, P21, P30, P40, P60, P70. Available in bronze there is the PMB16, PMB21, PB16 and PB21. For applications that require higher heads but lower flows, such as a steam press, available in cast iron with brass inserts, there is the PSA70/A in three phase and the PSAM70/A in single phase.

Standard mechanical seal is carbon, ceramic with nitrile elastomers, which are good for up to 80 degrees C on the bronze versions, and 40 degrees C in the cast iron versions.

Please call for further information and prices.

These pumps are constructed from cast iron and are fitted with a 316 stainless steel impeller, with Carbon, Ceramic mechanical seals (other options available on request) and NBR elastomers.

The FHE has an extended motor shaft, whilst the FHS (our preferred configuration) is fitted with a stub shaft, and so can be fitted with a standard IE2 electric motor. They are designed to pump water up to 85 deg C (up to 120 degrees on the larger 100 to 150 models). They can also handle moderately aggressive liquids (please contact us for chemical compatibility) and are used in a variety of industries ranging from water treatment, heat recovery and filtration equipment, through to chillers, irrigation and general water distribution. Motor powers range from 0.25 Kw up to 132 Kw with speeds of 1450 rpm and 2900 rpm (nominal). Flow rates can go out as much as 650 M3/hr (10,833 litres per minute) with heads ranging from 4 metres up to 100 metres.

This style of pump is one of our best sellers and can be fitted with the Hydrovar frequency converter to achieve optimum flexibility and efficiency.

Please call for further information and prices.

This is Lowara’s new range of stainless steel vertical multistage pumps, which have replaced the old SV2, SV4, SV8, SV16, SV32, SV64 pump models.

The new model sizes are 1SV, 3SV, 5SV, 10SV, 15SV and 22SV and each size being available with a varying numbers of impellers depending on the pressures required.

The new range has redesigned hydraulics and higher efficiency electric motors. They are found on booster pump sets, irrigation systems, wash systems, boiler feed and many more industrial and commercial applications. The entire wet end (pump materials that are in direct contact with the liquid being pumped) is constructed from stainless steel, with EPDM o-rings and a Carbon vs Silicon Carbide mechanical seal. This combination of hydraulic design and materials of construction, allows the pump to handle liquid temperatures of up to 120 degrees C, flows of up to 480 litres per minute and pressures up to 25 bar.

These pumps can all be fitted with the Hydrovar variable speed drive.

A similar design configuration to the surface mounted E-SV multistage pumps, but these pumps are designed to be mounted directly into the liquid feed tank. This makes them ideally suited for pumping high pressure coolant on machine tool applications, for example when coolant is actually pumped directly through the cutting tool and on to the job.

The range sizes are SVI2, SVI4, SVI8, SVI16, SVI33, SVI46, SVI66, and SVI92 and each size being available with a varying numbers of impellers depending on the pressures required. Various mechanical seal combinations are available on request and also longer stem lengths are available.

To enable this style of pump to generate higher pressures (up to approx 24 bar), the impellers will have been designed with a small through way and so the coolant must be kept clean or blockages can occur. There is a strainer on the base of the pump, so this will prevent some solids from entering the impeller stack. Please contact us if you require any further information or a data sheet sending.

These pumps are constructed from cast iron and are fitted with either a stainless steel or cast iron impeller. The suction and discharge ports are flanged and have an inline configuration. They are ideally suited for heating, ventilation, cooling and chilling applications.

Mechanically sealed with either Carbon vs Ceramic or Silicon Carbide vs Carbon seal faces and EPDM elastomers (rubber parts) which will allow the pump to handle liquids of between 130-140 degrees C depending on which model.

The FCE pumps are close coupled with a special motor shaft extension, and the FCS is fitted with a stub shaft and standard motor (our preference). They are also available as a twin pump unit FCTE and FCTS.

Two pole (2900 rpm nom speed) electric motors are fitted to the following size pumps : FCE40, FCE50, FCE65, FCE80 and FCE100, with Kw ratings from 0.75Kw up to 22Kw. Four pole motors (1450 rpm nom speed) can also be fitted to FCS125, and FCS150 models.

Lowara have an extensive range of submersible drainage pumps, starting with the ever popular DOC series (DOC3 and DOC7) commonly used for cellar, basement or lift shaft drainage, and can come with or without a float switch for automatic control.

The DIWA series consisting of the DIWA05, DIWA07, DIWA11 and DIWA15 are constructed entirely from 304 stainless steel, and designed for slightly more arduous duties with higher heads and flows.

The DN110, DN115 and DN120 range, are constructed from both cast iron and stainless steel, but have an abrasion resistant coated impeller, suitable for pumping water with up to 5mm suspended solids.

The READY4 and READY8 pumps (Also known as Flygt DIGGA) have a liquid end made entirely from abrasion resistant Technopolymer, have a double mechanical seal, with the outboard faces in Silicon Carbide, and can handle dirty water containing large quantities of sand in suspension. Commonly known as a contractors pump, and can be often found in building yards and in other environments pumping abrasive liquids.

Please contact us if you require any futher information or a data sheet sending.

The Lowara range of submersible sewage or solids handling pumps, starts with the DOMO series, consisting of the DOMO7, DOMO10, DOMO15 and DOMO20. These pumps are constructed from stainless steel and are mechanically sealed. Solid sizes of between 35mm and 50mm can be handled depending on which pump model. There are three types of impeller that can be fitted to this pump : A vortex VX impeller, a twin channel impeller, or a grinder GRI impeller, and can also be fitted with a float switch for automatic pumping.

The DL range consists of models DL80, DL90, DL105, DL109 and DL125. They are constructed from both cast iron and stainless steel, and can be fitted with either a screwed 2 inch elbow and feet for free standing use, or flanged DLF for guide rail mounting. Single channel DL or vortex DLV impellers can be fitted depending on the application. Commonly used in septic tanks and sewage chambers or emergency drainage of flooded areas.

The GLS GLV range consists of models GLS50 and GLS65 single and multi channel impeller pumps, and the GLV50, GLV65, GLV80 and GLV100 vortex impeller pumps. Designed mainly for guide rail mounting in either pre packaged pumping stations or in concrete ring sewage chambers, these pumps have proved to be long lasting and hard wearing. Flow rates can be as much as 54 litres per second using the largest 4 pole pump, and solids handling of up to 100mm for the GLV100.

Please contact us if you require any further information or a data sheet sending.

This range of four inch borehole pump consists of the following models : 1GSL, 2GS, 4GS, 6GS, 8GS, 12GS and 16GS.  Heads over 300 metres and flow rates in excess of 350 litres per minute can be achieved depending on pump model.

The pumps are constructed from stainless steel, lexan and laripur, and are fitted with a floating impeller design which gives excellent wear resistance. All pumps can be supplied with submersible cable, probes, jointing kits, control panels and various other accessories for complete installation. Commonly used for water supply, pressure boosting and irrigation.

Please contact us if you require any further information or a data sheet sending.

Constructed from stainless steel and technopolymer, the SCUBA series consists of the following models : SC205, SC207, SC209, SC211, SC407, SC409 and SC411. All pumps are supplied with a 20 metre submersible cable, and are designed specifically for pumping clean water from wells and tanks. The single phase pumps can be fitted with a float switch for either automatic operation, or dry run protection. Commonly used for domestic water supply and irrigation, but also used for large fountains and pressure boosting applications.

The single phase water cooled Hydrovar and the Teknospeed variable speed electric pumps, have been designed primarily for residential applications. Basically, by using a frequency converter, electric motor driven pumps can be ramped up or slowed down depending upon the water supply demand, and can maintain constant pressure at variable flow rates. These units can be fitted to the SV, CEA, CA and HM range of pumps depending upon the individual application.

Please contact us if you require any further information or a data sheet sending.

Lowara have a wide range of both WRAS and non WRAS approved pressure vessels and expansion tanks. WRAS (Water Regulations Advisory Scheme) approved vessels start from a small 2 litre stainless vertical tank, and range right up to a 1000 litre vertical tank. The horizontal sizes range from 24 litres up to 300 litres.

Data sheets are available showing dimensions, capacity and pressure ratings, so please contact us for further information.