Brinkmann Pumps
As an independent UK pump distributor, we can supply the full range of Brinkmann pumps, starting with their small peripheral single stage coolant pumps, right through to cutter pumps, multistage pumps and high pressure screw spindle pumps.
Brinkmann are renowned worldwide for their performance and reliability, and are also known for their ability to handle highly inflated (aerated) liquid emulsions quite often found in grinding applications, using their “quick suctioning” semi open impeller pumps.
The Brinkmann Pump Range :
Brinkmann TA STA TE STE Pumps
These are centrifugal pumps with the impeller fitted on the driving shaft extension. They are designed for mounting on top of the coolant tank, with the pump extension being immersed in the coolant.
The maximum coolant level must stay a few inches below the mounting flange.
The STA pumps are equipped with a 45 degree flange connection which allows for either vertical or horizontal pipe connection and the connection of a pressure gauge.
Brinkmann TL TAL STL SAL Pumps
Quick Suctioning Immersion Pumps equipped with Brinkmann’s patented Suction De-aeration System. These pumps are excellently suited for pumping extremely inflated (aerated) fluids (emulsions, cooling/cutting oils) as they occur in heavy cutting when turning, milling or grinding.
The quick suctioning immersion pumps reach stable working conditions as soon as the liquid level reaches the suction inlet.
The SAL pumps are also equipped with the 45 degree flange connection.
Brinkmann TGL SGL Pumps
Quick Suctioning Immersion Pumps again, equipped with the patented Suction De-aeration System for extremely inflated fluids such as grinding oils as they occur in high-speed grinding.
The quick suctioning immersion pumps reach stable working conditions as soon as the liquid level reaches the suction inlet.
The SGL pumps are also equipped with the 45 degree flange connection
Brinkmann SFL Pumps
Quick Suctioning Immersion Pumps equipped with the Suction De-aeration System for pumping extremely inflated emulsions with heavy chip loads as they occur in heavy cutting when turning, milling or grinding.
The quick suctioning immersion pumps reach stable working conditions as soon as the liquid level reaches the suction inlet.
The SFL pumps are also equipped with the 45 degree flange connection
Brinkmann SFC Pump Range
These are Brinkmann’s cutter pumps suitable for cutting aluminium chips or similar materials and for pumping these materials along with the coolant fluid. An agitator located at the pump suction helps to break up and separate any large bundles of chips or birds’ nests which reach the pump suction.
The hardened cutting unit cuts chips, and the semi-open impeller with its large clearances allows pumping of the particles along with the coolant fluid from the machine back to the filter. The SFC pumps are capable of handling chip to coolant ratios of up to 1.5 percent by weight.
The SFC pumps are equipped with the user-friendly 45 degree flange connection
Brinkmann SFT Pump Range
These are vortex pumps designed to lift coolant for filtering. Coarse shreds can be transported together with liquids.
The pump inlet and pump discharge port have the same dimensions.
The SFT pumps are also equipped with the 45 degree flange connection
Brinkmann TAS STS Pump Range
Suction Immersion Pumps suitable for connecting to vacuum filters through their simple connection situated on the suction side (for instance, with a slot screen).
Suction immersion pumps without seals, are positioned in the area of unfiltered coolant within the vessel.
With their robust design, they allow operating pressures of –5 PSI to –7 PSI (–0.3 bar to –0.5 bar) on the suction side.
The STS pumps are also equipped with the 45 degree flange connection.
Brinkmann SBA SBG SBF SBC Pump Range
Horizontal End-Suction Pumps, which are centrifugal in-line pumps with a compact design where the impeller is mounted onto the extended motor shaft. These pumps are not self-priming and must be gravity fed (flooded suction). All pumps are sealed with a single mechanical seal. There is an option (upon request) for a second mechanical seal to be fitted to allow for dry-running (-GD). This pump series is designed for horizontal installations next to a tank and for pumping air entrained coolant fluids, such as water soluble coolants or cutting oils, from high speed turning, milling or grinding applications.
Brinkmann TS Pump Range
Immersion Pump models suitable for CNC machine tools where pumping coolant supply through the tool holder or driving spindle is required.
The TS series is also used for machines equipped with internally cooled tools.
These pumps are equipped with a single peripheral impeller to achieve a compact high pressure unit. Due to the nature of the design, TS pumps are suitable for filtered coolant only.
Brinkmann TC TH FH STC STH Pump Range
Immersion Pumps models TC40...TC160 have been especially developed to supply internally cooled tools with coolant. The closed impellers provide optimal hydraulic efficiencies while minimizing power consumption.
For alternating machining using both internally and externally cooled tools, these models are available with a pole-change motor (Dahlander) for optional change over to half speed operation.
Longer pump lengths and threaded inlets are available upon request.
The TH and FH are pressure boosting pumps with closed impellers. However, in addition, the TH series offers high pressures at short immersion depths.
The Inline pumps of the series FH can also be used as booster pump if provided with positive inlet pressure. This inlet pressure can be provided by the central coolant supply or a feed pump. In such a setup, pumps of the series FH can raise the incoming pressure by up to 375 PSI (26 bar).
Once again, for alternating machining using internally and externally cooled tools, these models are available with a pole-change motor (Dahlander) for optional change over to half speed operation.
Brinkmann KTF Pump Range
Immersion Pumps with a plastic construction, suitable for various water supply applications. These pumps are also suitable for a wide range of chemical liquids, but please check with us to ensure that the proposed pumped liquid is compatible.
No shaft seal is required, due to the construction.
Brinkmann KC60 Pump Range
Small surface mounted pump with a peripheral impeller, suitable for pumping thin-bodied fluids with no particles.
Brinkmann SB20S SB40S SB60S Pump Range
Open impeller suction pumps which will self-prime after initial priming and operate according to the bypass duct principle. We recommend pump models featuring a bronze body for pumping water without anti-corrosion additives.
We also can supply coolant pumps from companies such as Knoll, Spandau, Sacemi and Gusher.
Please contact us on 0116 2897908 for further information on this extensive range of quality machine tool coolant pumps